I'm tired of walking in to the med bay disorganized and messy as well as missing important things so I took a few screenies the way me and Burning Bullet made it. Please follow the diagram. You require "pet" flags.
The beds SHOULD be static set so you don't need to spawn them.
The boxes on the left are shipments. Do not spawn boxes. That spot is where shipments should go.
Cryogenics fridge
The walls are 3 x # plates (the 3 being the vertical) and the table is the long table at the bottom of the useful construction. You can find the mini console by searching "combine" in your spawn menu.http://img690.imageshack.us/img690/7008/rpcity45catalyst0003.jpg[/img]
To set the walls up, there are a few simple steps.
-First, use the weld easy to quickly position the walls where you want them.
-Take out adv ballsocket and set it up like this:
Force limit: 0
Torque limit: 0
X Minimum: -180
X Maximum: 180
Y Minimum: -180
Y Maximum: 180
Z Minimum: -180
Z Maximum: 180
X Friction: 0
Y Friction: 0
Z Friction: 0
[X] Free Movement:
[X] No Collide:-Fire at the wall first with the toolgun, then the world.
-Freeze the wall with your physgun.
-Take out the weld tool and unweld the walls by looking at them and hitting RELOAD.
-Use the physgun to position the walls perfectly. REMEMBER TO FREEZE!!! (or it will fall through the map)
-Material with the phx dark grey wall material
Thankyou for following the Med-Bay setup guide.
Garry's Mod
Old CCA Boards [Backup]